-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Designing PCBs With Additive Traces
April 28, 2022 | Tomas Chester, Chester Electronic DesignEstimated reading time: 2 minutes
Advances in technology have been clear to see within the component packaging industry, as the ball grid array (BGA) package sizes reduce from 1.0 mm pitch to 0.8 mm, 0.4 mm, and even beyond. However, while these improvements have occurred with component packages, it has become increasingly more difficult to break out and route the dense circuitry associated with these parts. Currently, the high-density interconnect (HDI) method typically used for the breakout of such parts has been to create the smallest possible subtractive-etched traces with microvias to allow for connections and escapes on the innerlayers of your PCB.
Now there are new fabrication processes that change how we can approach some of these layout difficulties. Additive and semi-additive construction now allows us to get down below 0.075 mm trace and gap sizes easily and reliably, however, utilizing it brings its own series of challenges to the table. Before designers and engineers can start to use this technology, we need to understand the difference between the standard subtractive fabrication method and these new additive fabrication methods, as well as their respective design requirements for trace impedance, and the signal integrity impact from routing traces closer together.
Subtractive vs. Additive
Let's start by taking a brief high-level view of the different fabrication processes. With subtractive fabrication, our PCBs start with a base layer of copper of some thickness already laminated to the substrate. Then copper is electrolessly plated onto the board’s outer layers, including inside the drill and via holes. A design image is then applied, an etch resist plated onto the exposed traces and holes, after which etching will occur. This is our subtractive step, where we remove the copper in areas where there was no image applied. This is also the limiting step in the subtractive fabrication process, because as we etch vertically down through the copper, the etching agents also remove copper in a horizontal direction, under the applied design image. The result of this process is a final copper trace cross-section with a trapezoidal shape. The critical concern here is that if the trace height is half as tall as its width, likely the etching process will remove the trace.
With additive fabrication, the process can be imagined as similar to 3D printing. The PCB starts with no copper on the laminate material and is instead “built” up on top of a thin seed layer of electroless copper, or on top of a thin laminated copper foil. This not only allows for trace and gap sizes down to 0.010 mm; it also creates a trace cross-section that has a rectangular shape.
To read this entire article, which appeared in the April 2022 issue of Design007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.