-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Chemcut’s Robotic Solution
May 24, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
The I-Connect007 Editorial Staff spoke with Chemcut’s Jerry Reitz, and Atlantic Microtool’s Bruce Siemering and Neil Robinson about recent robotic automation advances, a specific robotic solution from Automata, and the changing factors tipping toward robotic automation in the current market.
Nolan Johnson: While robotics in the PCB fab area have been on the cusp for quite some time, it seems they haven’t taken off. Chemcut has been working with Atlantic Microtool and Automata on a possible solution. What motivated you to partner on robotic handlers now?
Jerry Reitz: By no means is this a large, industrialized robot. We believe that it is a fit for most of our customer’s applications, from small shops with smaller budgets and limited space to large facilities looking for a plug and play solution for large volume production.
Andy Shaughnessy: Who’s the manufacturer?
Bruce Siemering: The robot arm is manufactured for Chemcut by a robotics company out of the United Kingdom. Atlantic Microtool, which is owned by me and Neil Robinson made the initial contact and introduction to Chemcut.
We wanted to solve this problem where somebody is running a conveyorized line, and they’re loading a metal panel or a circuit board every 30 seconds, and they’re just standing there, or they’re running around to the other side to unload. It’s a mundane job that would be a perfect fit for this robot.
As we were looking for a robot, we noticed the ones we found were a little more difficult to program because the software was intimidating. One of the attractive features of this robotic handler we offer is that the software works on top of Python, which is a common software that runs automation.
It’s very easy to use and it’s not intimidating. When we first sent a robot to Chemcut one of their engineers, Dan Dietz, had it up and running in an hour or two. You can pull it out of the box, follow the instructions, and program it pretty rapidly to pick something up and move it to a conveyor. There’s not a very complex tool path with it.
Neil Robinson: When we’ve done demonstrations in the field, we show up at a customer site and within 45 minutes, we are actively loading product onto any conveyorized line. Not only is the setup simple, but it’s very simple to operate. Anybody who works in a manufacturing facility could be taught to program this robot within a couple of hours, unlike other industrial robots that have equally sophisticated software that require certain expertise to program. As Bruce pointed out, the software used to program this robot is a very user-friendly shell that sits on top of Python. Through graphics on the screen, two buttons that reside on the robot, and a mouse, you can create pretty sophisticated programs to load and unload equipment. The robot also has several digital inputs and outputs for sending and receiving commands from other equipment and devices.
Johnson: Is the handler so specialized that it only works well in a board fab application, or can it be used for other purposes?
Robinson: This robot wasn’t originally designed for the chemical milling or PCB industries. Actually, most of the early applications were in laboratory automation. We’ve taken that robot and adapted it to chemical milling and the printed circuit board industries with the use of specialized suction grippers. The robot can also be equipped with other tooling to handle many different applications, but primarily we are focused on the conveyorized equipment that Chemcut offers.
Johnson: With such an easy setup and operation, are your customers buying into the idea?
Robinson: Yes, overall, there are 300 to 400 units in the field with the first chemical milling installation in the United Kingdom. That unit has been in operation for a couple of years and the robot is holding up very well to that chemical environment.
To read this entire conversation, which appeared in the May 2022 issue of PCB007 Magazine, click here.
Suggested Items
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
IEC USA Congratulates Bernie Consitt for 25 Years of Service
04/09/2024 | IECJoin us in celebrating Bernie Consitt's 25 years of service and camaraderie at IEC (International Electronic Components). Bernie has been instrumental in his role as Accounting Manager, helping to supervise, track, and evaluate day-to-day activities within the accounting team.