-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Electronica: Picking Up Where We Left Off
November 18, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 1 minute
The productronica/electronica pairing of trade shows is an experience unlike any other; anyone who has ever attended is likely to back me up on that claim. This year’s iteration of electronica, taking place at Trade Fair Center Messe München, Nov. 15-18, is no exception. I-Connect007 was onsite to gather the news and share our impressions of the show.
First, the show’s attendance was rumored to be in the 60,000+ range. This number sure seemed to be reasonable given the crowd sizes we witnessed. The two shows, productronica and electronica, alternate years at this venue.
With electronica historically the show for electronics engineering and prototyping; productronica is the show for multidisciplinary electronics production.This puts certain vendors, such as AOI equipment manufacturers in a no-man’s land in which they simultaneously fit and don’t fit in either show. That said, the opinion is that electronica is evolving into the venue for both electronic engineering and production.
On the whole, show offerings tended to be iterative rather than disruptive. This isn’t necessarily bad news; industry players are converging on an interconnectable future.
There were, however, two disruptive offerings that caught my eye: Cybord and NanoDimension/Essemtec. It was entirely coincidental that both companies have Israeli roots. The Nano/Essemtec collaboration is making good progress on delivering a complete all-in-one fab-and-assembly solution based upon 3D printed substrates. They’ve identified a clear niche in the onsite prototype and low-volume space. Cybord’s value proposition is 100% validation of components prior to assembly. Cybord offers AI-driven component verification performed at receiving and follows up with additional verification of every part using pick-and-place images, and AOI images. Cybord completes the process by offering a post-production tagging method which provides unique tracing for the finished board. This capability promises to reduce (if not eliminate) broad product recalls by providing tracing down to the individual board by serial number.
Over the next several weeks, watch for some of the interviews I’ve had onsite here in Germany—including Cybord and Nano/Essemtec, as appropriate.
Being at electronica with my cohort, European Technical Editor Pete Starkey, has been a pleasure. Cheers!
Suggested Items
Janene Stinson, Boeing, Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
Zentech’s Board of Directors Announces the Return of Matt Turpin as President and CEO
04/22/2024 | Zentech ManufacturingTurpin draws upon over 35 years of experience in the electronics industry and has an 18-year history with Zentech. He previously served as President and CEO from 2006 to 2019 after which time he has remained active in the EMS industry as an advisor to Zentech and other industry organizations.
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
ZESTRON Welcomes Whitlock Associates as New Addition to their Existing Rep Team in Florida
04/19/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, is thrilled to announce the addition of Whitlock Associates to its esteemed network of sales representatives.