-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Electronics vs. Physics: Why Vias Don’t Get Hot
December 6, 2022 | Douglas Brooks, Consultant, and Johannes Adam, ADAM ResearchEstimated reading time: 1 minute
Most of are aware that when we pass an electrical current through a trace (conductor), the trace will heat up. This temperature increase is caused by the I2R power loss dissipated in the resistance of the trace. The resistance of a copper trace is mostly determined by its geometry (cross-sectional area), and there are lots of studies trying to look at the relationship between the current down a trace (of known size) and the resulting temperature of the trace.
But the situation is much more complicated than this. There are physical properties that exist that result in helping to cool the trace. These properties are usually a combination of conduction of the heat away from the trace through the material, convection of the heat away from the trace through the air, and radiation of the heat away from the trace. A stable temperature is reached when the I2R heating equals the cooling—i.e., when the electronic and physical properties are balanced.
We have spent several (enjoyable) years collaborating on these effects. Douglas is an electrical engineer and understands electronics. Johannes is a thermodynamics physicist, and understands heat transfer. Between us we learned a lot about the thermal characteristics of vias.
Vias Don’t Get Very Hot
Traces heat because of the current through their resistance, resulting in I2R power losses. This temperature increase is caused by what we call “Joule heating”:
Joule heating is the physical effect by which the pass(age) of current through an electrical conductor produces thermal energy. This thermal energy is then evidenced through a rise in the conductor material temperature, thus the term “heating.” One can see Joule heating as a transformation between “electrical energy” and “thermal energy,” following the energy conservation principle.
We are all aware that, in general, for a given trace an increase in current through the trace will correspond to an increase in temperature of the trace. When it comes to vias, the industry guidelines have generally been to size the cross-sectional area of a via to equal that of its parent trace. Then the via will be the same temperature as the trace.
To read this entire article, which appeared in the November 2022 issue of Design007 Magazine, click here.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?