Electroformed Stencils


Reading time ( words)

The continued drive in electronics to place increasingly smaller components on boards poses continuing challenges to board manufacturers. Tight pad spacing as well as placement of small 0201 and 01005 components is becoming more commonplace on board assemblies. Not only are the parts nearly invisible when placed, but their small size causes challenges with the solder paste application and release needed to yield reproducible, low-defect solder joints. The short scoop this month is that you can meet the challenges of paste application for difficult assembly printing processes by using electroformed stencils. 

It may seem that a stencil is a rather simple device; after all, in its basic form it is just a sheet of metal stretched taught with hole patterns placed in it to allow application of solder paste in the open areas. The stencil and its fabrication have a great influence over the ability of the circuit board assembly manufacturer to reliably reproduce the desired depositions necessary for paste application.

Stencils can be laser cut with or without post-processing, which for many applications is sufficient to get the paste application process completed reliably. Both of these fabrication techniques are currently employed in mainstream stencil production, but they both start to exhibit their limitations as pattern features decrease in size. The roughness of the stencil wall is one of the major influences on how well paste will release from the stencil. The rougher the sidewall of the aperture, the more the paste is prone to sticking onto the edge of the wall. The apertures used with larger pad features are somewhat more tolerant to edge roughness due to usually higher area ratios. As the pattern features decrease in size, the amount of paste that does not release due to a rough edge becomes an increasingly larger portion of the target application volume. So as feature size decreases, the fabrication of the stencil needs to be constructed for enhanced release capability. 

Read the full column here.


Editor's Note: This column originally appeared in the January 2014 issue of SMT Magazine.

Share




Suggested Items

SMT Tooling, PSA: 'Perfect Marriage of Innovation and Product'

10/26/2022 | Nolan Johnson, I-Connect007
Jeffrey Pulaski describes the recent partnership between SMT Tooling and PSA, which brings SMT Tooling’s innovation and PSA’s manufacturing capabilities together. Pulaski also shares news on product development, and what visitors to SMTA International can expect to see in SMT Tooling’s floor presence.

KYZEN Comes Clean For SMTAI

10/19/2022 | Andy Shaughnessy, I-Connect007
In this interview, KYZEN Executive Vice President Tom Forsythe explains his company’s plans for the upcoming SMTA International show in Minneapolis, Minnesota, Oct. 31-Nov. 3. He discusses KYZEN’s latest aqueous cleaning chemistries and the company’s focus on providing reliable cleaning equipment and accurate data for customers. "This is the latest in that expanded envelope, with better economics, and better environmental health and safety," he says. "It's all part of this trend of always trying to be a better product and deliver better value.

SMTA International Technical Conference: Trending on Topic

10/19/2022 | SMTA
One of the highlights of SMTA International is the Technical Conference, where more than 100 papers will be presented across at least 30 sessions. “Work that was delayed due to the effects of COVID has been completed and the amount of material coming from the industry is impressive,” says Julie Silk, VP of technical programs. “We have a packed conference this year in Minneapolis.”



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.