Another Look at AOI

Reading time ( words)

PCB inspection is taking on greater significance as boards and packaging become increasingly smaller, with greater functionality. Automated optical inspection (AOI) and its backup associate, X-ray, team up to catch a variety of board assembly problems. But it’s AOI that’s at the forefront of this process.

AOI takes on a variety of key assignments, such as checking out the numbers labeled on passive and active devices and matching them with the database to assure they’re legitimate components, as specified in the bill of materials (BOM). Also, if alternate parts are used, the AOI machine is trained to verify them, regardless of manufacturer, as long as the device has the same footprint, value, tolerance, voltage, package type, etc.

That’s only the beginning. AOI is excellent at detecting missing or wrong components and misalignments. If a component is misaligned, say at 30° or 45°, AOI catches it. It also catches opens and bridging, and it can check for skewed parts and tombstoning. AOI can detect anything as long as it’s written on the component.

Read the full column here.


Editor's Note: This column originally appeared in the October 2013 issue of SMT Magazine.

04/14/2021 | John R. Watson, Altium

Most PCB designers know precisely how Captain James T. Kirk felt because we often feel the same way when starting a new design. We are launching into something that we ultimately don't know how it will turn out. We don't know the difficulties we'll face or problems we’ll need to fix. While we can control the design process and use our skills to make reasonable decisions, there are often huge hazards awaiting us in the "unknown." One worsening problem for all designers is component procurement.

04/02/2021 | Bill Cardoso, Creative Electron

How about a little refresher on some of the most effective techniques for component inspection using X-ray? While other visual inspection techniques provide important insight into component quality and authenticity, nothing exceeds X-ray inspection for fast, accurate, non-destructive evaluation. The following are 10 ways to identify a fake IC using X-ray.

03/03/2021 | Nolan Johnson, I-Connect007

Nolan Johnson speaks with Super Dry’s Richard Heimsch about how the need for dry storage solutions has increased throughout the pandemic, including further demands for traceability and automation capabilities.