SMART Group Webinar: Electronics in Harsh Environments


Reading time ( words)

SMART Group presented a webinar June 2, 2014 to introduce issues to be explored in depth at a seminar on July 2, 2014 at the National Physical Laboratory (NPL). Technical Director Bob Willis moderated a programme of four presentations from Technical Committee specialists Sue Knight, Richard Boyle, Chris Hunt, and Ian Fox.

Sue Knight from STI gave an introductory overview: Why are electronics needed in harsh environments? "I’ll outline the problems; the other presenters will explain how to solve them!” said Knight. She listed applications in satellite communications and base stations, oil exploration and power generation, and aerospace, automotive, and industrial instrumentation, sensors, and controls.

Against this background, she summarised the main environmental factors affecting the performance and reliability of electronic assemblies. Temperature was the biggest issue: Standard industrial components were typically rated for 85°C maximum operating temperature, and mil-aero components to 125°C. Standard high temperature laminate was only usable in applications up to about 175°C. And solder joints were unreliable when equipment operating temperature approached the melting point of standard solder alloys, particularly if accompanied by mechanical shock and vibration.

Other environmental concerns were the effects of oil, water, mud, and chemicals. How did the harsh environment considerations typically associated with military and aerospace applications relate to everyday electronics? She explained how research and development generated from those areas was often subsequently applied to benefit the functionality and reliability of commercially available equipment.

RoHS had prohibited the use of lead in solders for all but certain specific applications where no practicable or proven alternative existed. High-lead alloys had for many years been used for die-attach and had given reliable results as solders for high-temperature environments. Under current RoHS and ELV legislation, they could continue to be used in selected electronics and automotive applications, but if and when suitable alternatives to high-lead solders were found then it was likely that the legislation would be amended to prohibit all use of lead-containing materials.

Solder specialist Richard Boyle from Henkel discussed the EMEA Solder Replacement Umbrella Programme, which had the initial aims of finding suitable replacements in terms of electrical, thermal, and mechanical performance, developing products in compliance with 2014 RoHS and ELV standards, and ideally producing drop-in alternatives to existing paste, wire and preforms. The preliminary focus was on paste, potentially the simplest option. The programme was taking a multi-faceted approach, looking at different solutions for sub-segments of the market, in respect of application, cost and performance, and was considering organic-based, metallurgic-based, and combination organic-metallurgic approaches including high silver-content organic die attach, epoxy-solder paste based on tin-antimony alloys, transient liquid phase sintering, and silver sintering.

Boyle’s reference to silver sintering was expanded upon by Dr. Chris Hunt, who discussed current research at NPL on sintered silver interconnect technology with different component types and PCB finishes, and NPL’s participation in the TSB-funded Electronic Component Sintered Interconnections (ELCOSINT) project, aimed at development of novel polymeric, sintered interconnection materials to replace high-lead solders and further increase the operating temperature of electronic assemblies. These materials, based on nano-silver, would be suitable for components subjected to operating temperatures of 250° or more, and the technology was designed to be compatible with standard microelectronics manufacturing processes. Several challenges remained to be addressed and mechanical performance and reliability had not yet been fully characterised.

Share

Print


Suggested Items

Catching Up With Nova Engineering

04/27/2021 | Dan Beaulieu, D.B. Management Group
When searching for companies to interview, I always look for something unique and that makes the company special. Truth be told, I am a collector of stories about good, well-run, unique companies that we can learn something from. Nova Engineering is one of those companies.

Hans-Peter Tranitz: Dieter Bergman IPC Fellowship Award Recipient

04/22/2021 | Patty Goldman, I-Connect007
In this wide-ranging interview, Patty Goldman speaks with Continental Automotive’s Peter Tranitz about his IPC involvement with press-fit and other automotive standards which have earned him the coveted Dieter Bergman IPC Fellowship Award.

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 3

04/22/2021 | Brent Fischthal, Koh Young America
Initiatives like the IPC Connected Factory Exchange (CFX) and IPC-Hermes-9852 underpin efforts within the industry to develop standards and help create a smart factory. These M2M communication standards, guided in part by Industry 4.0, are altering the manufacturing process by improving metrics such as first pass yield and throughput by applying autonomous process adjustments.



Copyright © 2021 I-Connect007. All rights reserved.