Japan Unix Debuts Optimal Laser Shape Rings


Reading time ( words)

japan_unix.jpgJapan Unix, a solutions provider for manual and soldering automation, introduces laser shape rings. Choosing the best laser spot shape to fit components and land shapes can reduce circuit board problems.

Laser shapes are available in more than just the well-known circle. It is important to choose the optimal shape to fit the components and shapes. Inadvertent burning of circuit boards or other troubles can be prevented by adjusting appropriate laser shapes such as an oval (ellipse) or a ring-shape. In addition, a beam-splitting technology provides “twin-spot laser,” which enables the simultaneous soldering of two joints. In addition to oval, ring and twin-spot, Japan Unix offers laser beam spot shapes of circle, square, ring and oval ring. (The ring and oval ring shapes are patented by Japan Unix.)

Japan Unix can help customers choose the laser type most suitable to their board patterns and components. For example, if the pad has an ellipse shape, customers should expose it with the oval type. Also, if the through-hole has black resin or other components on the back, Japan Unix suggests that customers use the ring type to prevent the laser burning it.

About Japan Unix Co. Ltd.

Japan Unix was established in 1974 in Tokyo and has specialized in the soldering automation industry since its startup. A manufacturer and integrator of robotic soldering, Japan Unix offers production systems with advanced soldering methods that provide a high-speed quality soldering solution for automotive, medical, aerospace and electronics manufacturers. The company offers a wide range of soldering robots with a strong competency in precision soldering and factory automation.

Share

Print


Suggested Items

Excerpt: The Printed Circuit Assembler’s Guide to… Smart Data

04/07/2021 | Sagi Reuven and Zac Elliott, Siemens Digital Industries Software
Whenever we discuss data, keep in mind that people have been collecting data, verifying it, and translating it into reports for a long time. And if data is collected and processes are changed automatically, people still will be interpreting and verifying the accuracy of the data, creating reports, making recommendations, solving problems, tweaking, improving, and innovating. Whatever data collection system is used, any effort to digitalize needs to engage and empower the production team at the factory. Their role is to attend to the manufacturing process but also to act as the front line of communications and control.

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.



Copyright © 2021 I-Connect007. All rights reserved.