Engineered Material Systems Introduces DF-3005


Reading time ( words)

Engineered Material Systems, Inc., a leading global supplier of negative photo resist materials for MEMS and IC cooling applications, is pleased to introduce the DF-3005 Dry Film Negative Photo Resist for use in micro-electromechanical systems (MEMS) and wafer level packaging applications (TSV sealing). This material formulation has been optimized for hot roll lamination and processing on MEMS and IC wafers.

DF-3005 is available in other thickness formats from 5-50 µm, ±5 percent. The cured chemistry can withstand harsh environments including resistance to extreme moisture conditions and corrosive chemicals. The DF-3005 film is tougher (less brittle) than most negative photo resists on the market with a glass transition temperature of 158°C (By DMA Tan Delta) and a moderate modulus of 3.5 GPa at 25°C. It is hydrophobic in nature providing for chemical and moisture resistance. DF-3005 is compatible with and can be used in contact with the EMS line of spin coatable photoresists.

DF-3005 is the latest addition to Engineered Materials Systems’ full line of film and liquid negative photo resists formulated for making microfluidic channels on MEMS devices and integrated circuits.

For more information about the DF-3005 Dry Film Negative Photo Resist or to learn how Engineered Materials Systems can define, develop and create an engineered material solution that is right for your company, visit www.emsadhesives.com

About Engineered Material Systems

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. For more information, visit www.emsadhesives.com.

 

Share

Print


Suggested Items

‘Trust Me, I Have Your Chips Right Here’

01/17/2022 | Michael Ford, Aegis Software Corp.
When making the decision to purchase materials, there is a strong benefit from a trust in the supplier. When materials are in short supply, however, there is no time to establish trust with a new supplier, especially when it’s the only one that can fulfill a requirement. While the manufacturing world is seeking methods to find trust with previously unknown suppliers, there are also those who are getting cleverer at disguising their often-nefarious activities—ones that could bring catastrophic results. In the real world, how can supply chain trust be established and maintained, or is it safer to assume that everyone is out to get us?

Don’t Miss Further Discussion of Materials Testing in GEN3 Episode 6 of ‘Predicting Reliability in Electronics’

12/22/2021 | I-Connect007 Editorial Team
The sixth episode, “Materials Testing—Process Materials,” can be viewed in under four minutes. Presenters share information on paste vs. flux vs. rework, limitations of standards, hand soldering/rework cautions, and more. Designed to complement GEN3’s book, The Printed Circuit Assembler’s Guide to...Process Validation, this entire webinar series can be viewed in about an hour and covers a comprehensive range of topics surrounding the four groundbreaking test standards published between 2019 and 2021 that set the scene for Objective Evidence and its widespread influence throughout the world of electronics, whether in the high reliability arena of space, medical, automotive, or general industrial applications.

Real Time with… productronica: Electrolube is Going Green

12/14/2021 | Pete Starkey, I-Connect007
Pete Starkey visits with conformal coatings expert Phil Kinner of Electrolube about the company’s involvement in productronica, its new bio-friendly conformal coatings, and how the acquisition by MacDermid Alpha is opening new doors for Electrolube in the automotive industry.



Copyright © 2022 I-Connect007. All rights reserved.