Wireless Mouse Gets 3D Printed
June 19, 2015 | 3D PrintEstimated reading time: 2 minutes
Instructables contributor “machinest” decided that, despite the proliferation of cheap wireless mouse devices–they’re everywhere, aren’t they?–it couldn’t hurt to design one that could be 3D printed because, well, why not? While he (or she!) knew a lot about the technical part of the project, how the electronics worked, he didn’t know much about 3D modeling.
The ensuing make-it-yourself project involved working with electronic components, including a microcontroller, a circuit board, and optical sensors. “Machinest’s” Instructables tutorial is focused primarily on the 3D design and printing aspects of the mouse’s production.
It began at the drawing board with sketches on paper, working out what the shell or case of the device would look like–how it would most efficiently and ergonomically house the electronics, and ensuring that the PCB (printed circuit board) and the click buttons worked well with the overall design. It wasn’t a solo project, as some mechanical designers were consulted, but that’s the beauty of being a part of an ever-expanding maker community–there’s always help out there if you need it.
The transition from paper sketches of the model to 3D models was not an especially smooth one. Like many enthusiastic DIYers, “machinest” had a wealth of enthusiasm and interest in learning new skills but little know-how where CAD programs were concerned. He (or she!) explained:
The process may have been stalled indefinitely, had he not discovered ProtoDnD, a web-based collaborative platform that lets users submit their ideas to experienced designers who create 3D models for them. No longer do good ideas have to languish in the ether! Thanks to ProtoDnD, a knowledgeable CAD modeler stepped in.
A brainstorming session with the 3D modeling expert took place, including agreeing on dimensions and establishing some basic requirements: The mouse needed a window for the optical sensor. Pods for screwing the PCB to the base of the mouse were needed and a “solid mating” had to be ensured between the two switches on the PCB and the buttons on the case. Some back and forth ensued, including via annotations directly on the .stl model, refinements were made, and the final .stl files were ready for 3D printing.
The end result, printing on an Objet 3D printer, is pretty basic–impressively so in an age where making a simple device or project more complicated than it should be. Particularly cool is the translucent material that lets you see the inner-workings of the mouse. Although the project must certainly have cost its maker a good deal more than buying a mouse online or via a nearby retailer, as long as the electronics hold up, subsequent versions of the case can be easily and cheaply produced as long as there’s an accessible 3D printer and filament. Of course, in the absence of the latter, there are always web-based 3D printing services to do the job.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).