New 2-D Material's Properties Show Potential
June 24, 2015 | University of Nebraska–LincolnEstimated reading time: 3 minutes
One completed a series of theoretical calculations to predict its properties with the help of a massive computing center. The other grew it in bulk before waxing its atom-thin whiskers with the assistance of adhesive tape.
Together, University of Nebraska-Lincoln chemists Xiao Cheng Zeng and Alexander Sinitskii have demonstrated that a compound called titanium trisulfide could surge toward the fore of two-dimensional materials that are gaining popularity among designers of microelectronics.
The rise of 2-D materials -- sheets no more than a few atoms thick -- began with the 2004 demonstration of graphene, which remains the strongest and thinnest material known.
Zeng and Sinitskii have published two recent studies showing that titanium trisulfide compares favorably not only with graphene, but also phosphorene and molybdenum disulfide -- fellow 2-D materials that have shown great promise for electronic applications.
"There was no interest in the properties of few-layer titanium trisulfide until now," said Zeng, an Ameritas University Professor of chemistry. "We were among the first to look at them, and we've been very excited by what we've seen."
Zeng's theoretical study revealed that 2-D titanium trisulfide has the potential to transport electrons faster than phosphorene and molybdenum disulfide. This "electron mobility" helps dictate the speed of transistors, the devices that control electric current and amplify electrical power in technology ranging from cellphones to spacecraft.
Transistors also form the core of semiconductors, which rapidly switch between a current-conducting "on" state and current-insulating "off" state to represent the 1s and 0s of digital computing.
Graphene boasts unparalleled conductivity, but crucially lacks the quality that can turn it off: a band gap, which describes the energy necessary for electrons to jump from their near orbits around atoms to an outer "conduction band" that promotes conductivity.
Zeng and Sinitskii found that titanium trisulfide has a moderate band gap that approximates the one found in semiconductor favorite silicon, making it ideal for the on/off switching prized in such devices. The material also yields a large disparity between "on" and "off" conditions, which helps distinguish between resulting 1s and 0s.
The material's band gap also allows it to absorb elementary particles of light known as photons from most of the sun's emission spectrum. Because of this, titanium trisulfide could also prove useful in solar-cell designs, Sinitskii said.
Sinitskii, an assistant professor of chemistry, followed up on Zeng's theoretical calculations by combining titanium and sulfur to form a block of titanium trisulfide. He then used adhesive tape to rip off microscopic whiskers of the compound in the same way that the pioneers of graphene did with graphite more than a decade ago.
Sinitskii turned those whiskers into transistors and directed the performance tests that confirmed his colleague's work.
"As a theoretician, I always want to predict something," Zeng said. "The dream for us is that somebody makes it in the laboratory.
"I couldn't help but tell Alex. He's one of the leading experts in the world when it comes to making two-dimensional materials, and he did it just a couple of months after (I asked him)."
Sinitskii said the 2-D predecessors of titanium trisulfide should help accelerate his team's efforts to study and improve it.
"When people started working with devices based on graphene, the first two-dimensional material, everything was new," he said. "Researchers studied how different parameters affect device performance. When they started working on other 2-D materials, the knowledge generated from graphene research was very useful.
"In our case, we're actually in quite a good position, because we can learn a lot from those earlier studies and apply prior knowledge to making better transistors from titanium trisulfide."
Zeng's recent study, published in the journal Angewandte Chemie International Edition, was co-authored with postdoctoral researcher Jun Dai. The researchers performed their calculations through UNL's Holland Computing Center.
The Sinitskii-led study appeared in the journal Nanoscale. He shared authorship with postdoctoral researcher Alexey Lipatov and graduate students Peter Wilson, Mikhail Shekhirev, Jacob Teeter and Ross Netusil.
Both research teams received support from UNL's Materials Research Science and Engineering Center, part of a nationwide network of MRSECs sponsored by the National Science Foundation. They conducted their work in conjunction with the Nebraska Center for Materials and Nanoscience.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.