ZESTRON Intros New Enhanced Maintenance Cleaner, VIGON RC 303


Reading time ( words)

ZESTRON, the globally leading provider of high precision cleaning products, services and training solutions for the electronics industry, is pleased to introduce VIGON RC 303, a new water-based cleaning agent specifically developed for the removal of baked-on fluxes in reflow ovens and wave solder systems. It also removes re-condensed fluxes and emissions from condensation traps and heat exchangers.

VIGONRC 303’s new formulation offers improved cleaning across a wide range of lead-free and lead-based solders and reduced VOC emissions. VIGONRC 303 does not have a flashpoint, therefore it can be directly applied to warm surfaces as well as safely operated in wave solder systems. This environmentally friendly cleaning agent is available in a 1 liter spray bottle, as well as 5, 25 and 200 liter containers.

For more information on ZESTRON’s complete maintenance cleaning process solutions, please email infousa@zestron.com or visit www.zestron.com. Our expert team is available to provide comprehensive solutions to your cleaning needs.

About ZESTRON:

Headquartered in Manassas, Virginia, and operating in more than 35 countries, ZESTRON is the globally leading provider of high precision cleaning products, services and training solutions for the electronics manufacturing industry. With six worldwide technical centers and the largest team of chemical engineers in the industry, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information and to tour one of our unparalleled technical centers, please visit www.zestron.com.

 

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.