Engineers Test Fly Printed Aircraft Off Royal Navy Ship
July 30, 2015 | University of SouthamptonEstimated reading time: 2 minutes
HMS Mersey provided the perfect platform for the University of Southampton to test out their SULSA unmanned aerial vehicle (UAV).
Weighing 3kg and measuring 1.5m the airframe was created on a 3D printer using laser sintered nylon and catapulted off HMS Mersey into the Wyke Regis Training Facility in Weymouth, before landing on Chesil Beach.
The flight, which covered roughly 500 metres, lasted less than few minutes but demonstrated the potential use of small lightweight UAVs, which can be easily launched at sea, in a maritime environment. The aircraft carried a small video camera to record its flight and Southampton researchers monitored the flight from their UAV control van with its on-board video-cameras.
Known as Project Triangle the capability demonstration was led by Southampton researchers, making use of the coastal patrol and fisheries protection ship.
Professor Andy Keane, from Engineering and the Environment at the University of Southampton, says: “The key to increased use of UAVs is the simple production of low cost and rugged airframes – we believe our pioneering used of 3D printed nylon has advanced design thinking in the UAV community world-wide.”
It was back in 2011 that University of Southampton engineers initially designed, and flew project SULSA, the world’s first entirely “printed” aircraft.
With a wingspan of nearly 1.5 metres, the UAV being trialled has a cruise speed of 50kts (58mph) but can fly almost silently.
The aircraft is printed in four major parts and can be assembled without the use of any tools.
Watching the demonstration was the Royal Navy’s Commander Maritime Capability (Aviation), Cdr Bow Wheaton.
He said: “The Royal Navy’s Maritime Capability organisation is very interested in conceptual applications of unmanned and highly automated systems.
“We were delighted to assist the University of Southampton with development of their 3-D printed unmanned air vehicle and provide a ship for an embarked launch.”
Southampton alumnus, First Sea Lord Admiral Sir George Zambellas (Aeronautics, 1980) has championed the Navy’s involvement with Project Triangle, which resulted in the opportunity to provide a maritime platform for the test flight.
Adm Zambellas said: “Radical advances in capability often start with small steps. The launch of a 3D-printed aircraft from HMS Mersey is a small glimpse into the innovation and forward thinking that is now embedded in our Navy's approach.
“It's well known that our first squadron of remotely piloted aircraft have proven their worth in the Gulf, providing persistent airborne surveillance across huge areas of sea."
He added that this trial helps explore how simple, automated systems have the potential to replace complex machines.
“We are after more and greater capability in this field which delivers huge value for money. And, because it's new technology, with young people behind it, we're having fun doing it," Adm Zambellas said.
Suggested Items
American Made Advocacy: Going Beyond the CHIPS Act to Power American Manufacturing
03/26/2024 | Travis Kelly -- Column: American Made AdvocacyWhere have all the factories gone? A tour of America’s former bustling manufacturing communities is a stark reminder that, for the past three decades, we let the microelectronics manufacturing ecosystem disappear overseas, primarily to Asia. For decades, foreign competitors seeking to control critical markets played a long game. Government investment and subsidies were effective in undercutting U.S. and European companies. As other countries created this unfair competitive advantage in manufacturing, the know-how also migrated in their direction. This resulted in the serious workforce challenges the semiconductor and printed circuit board industries face today.
MacDermid Alpha Electronics Solutions’ New Book Now Available for Download
03/27/2024 | I-Connect007I-Connect007 is pleased to announce the launch of The Printed Circuit Assembler’s Guide to… Encapsulating Sustainability for Electronics by Beth Turner at MAES. The latest in a series of educational books published by I-Connect007, this book is an introductory guide to understanding encapsulation resins and a tool for application troubleshooting.
Happy’s Tech Talk #26: Balancing the Density Equation
03/14/2024 | Happy Holden -- Column: Happy’s Tech TalkPrinted circuit design and layout is a creative process that has profound implications for electronic products. With the need for more parts on an assembly, or the trend to make things smaller to be portable or for faster speeds, the design process is a challenging one. The process is one of “balancing the density equation” (Figure 1) with considerations for certain boundary conditions like electrical and thermal performance. Unfortunately, many designers do not realize that there is a mathematical process to the layout of a printed circuit
A Brief History of IPC APEX EXPO
03/13/2024 | Alicia Balonek, IPCIn 1998, the Surface Mount Equipment Manufacturers Association (SMEMA) approached IPC for help. Because of IPC’s success with the Printed Circuits Expo and recognizing the need to establish control of its own event, the discussions between SMEMA and IPC ensued. This led to a merger between the two organizations and provided SMEMA with IPC member benefits.
Electronics Circuit World Convention: A Brief History
03/07/2024 | David Bergman, IPCIn 1978, a new event called the Printed Circuit World Convention (PCWC) was born. It brought together printed wiring board (PWB) associations from around the world to focus on advancing technology, growing the market, and providing insight into the management of the manufacture of printed boards.