ULT AG Introduces Adsorption Dryer ULT Dry-Tec


Reading time ( words)

ULT AG recently introduced a completely new device for air-drying. The adsorption dryer ULT-Dry-Tec was developed for process air dehumidification at dew point temperatures of down to -60°C (-76° F).  It is based on the rotation dehumidification principle, designed to be utilised in sensitive areas of electronics production.

The compactly designed ULT Dry-Tec® requires little floor space and the system was developed specifically for extremely dry process air atmospheres, providing an extraordinary extraction rate at very low air humidity level.  Optimised high-performance sorption rotors guarantee a high efficiency level during low maintenance operation and the unit incorporates an integrated heat exchanger to help recover energy. In addition, the ULT Dry-Tec is easy to transport.

The applied capillary rotor condensation principle continuously and efficiently removes humidity from process air to be dried.  A constant and simultaneously controlled adsorption and a parallel running regeneration ensure an ideal dehumidification performance for process airflow.

ULT Dry-Tec suits a wide variety of operations in the following fields:

  • In electronics and electronic component manufacturing, as the unit provides constant drying conditions.
  • In the chemical industry, e.g. for clumping prevention and protection from moisture damage.
  • In the pharmaceutical industry, e.g. for pill packaging into blister strips or coating processes.
  • In the food industry, e.g. in tunnel freezers or for spray drying of convenience products.

About ULT AG

Founded in 1994, ULT AG is a leading manufacturer of high efficiency industrial air filtration systems and dust collectors.  The broad range of equipment has been designed for use in many industries such as machine construction, electronic production and general manufacturing, as well as medical, covering a wide range of applications.  In addition to the standard product range ULT AG offers custom-built units for special applications.  ULT AG provides customers in Europe, Asia, North America and Australia with extraction and filtration systems for material processing by means of laser, soldering, welding etc. as well as offering onsite services.  The company has been DIN EN ISO 9001 certified for more than 15 years.

Share




Suggested Items

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.

Book Excerpt: 'The Printed Circuit Assembler’s Guide to… Solder Defects'

06/07/2022 | I-Connect007 Editorial Team
Solder defects in surface-mount technology (SMT) assembly have been an issue for decades. Further, the combined challenges of Pb-free soldering and ever-increasing miniaturization have resulted in new or exacerbated defects in electronics assembly, but there are proven ways to avoid defects. This book will be especially beneficial to PCB assemblers in improving their assembly processes and the reliability of the end-product, eliminating field failures, and reducing costs.

KIC Adds Wave Monitoring Technology to Industry 4.0 Ecosystem for Thermal Processes

04/13/2022 | Andy Shaughnessy, I-Connect007
At the SMTA Dallas Expo, Andy Shaughnessy sat down with Miles Moreau of KIC to discuss the company’s latest offering in wave process inspection technology. Miles also explains how KIC’s early focus on automated real-time process monitoring has enabled them to become a leader in Smart factory implementation.



Copyright © 2022 I-Connect007. All rights reserved.