-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Shaughnessy Report: Doing My Part for Medical Electronics
February 24, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
If you’re like me, and most of you are, you’ve started getting mail from AARP. You exercise, because if you don’t, you feel like a fat slob. Your body hurts more often, and you just deal with the pain until it gets bad enough to go to the doctor. This is especially true for men; tough guys like us don’t like going to the doctor, unless we’ve actually severed an artery. Otherwise, we don’t need no stinkin’ doctors!
So when I first suspected I might have a hernia, I thought, “What is this thing poking through my stomach? I’ll just ignore it, and it will go away, like a noise in my car’s engine.” It hurt the most when I cut the grass on my riding mower, so I quit mowing the lawn. I liked that part!
But the pain didn’t go away. Eventually, when the pain got worse, my fledgling men’s common sense kicked in and I visited my local sawbones. “Not a big deal. Just routine outpatient surgery,” the doctor opined. “You’ll be in and out in a couple of hours, with a cool scar to boot, and some great painkillers.”
The surgeon couldn’t operate on my timeline; it had to be the week before Thanksgiving, or right before Christmas. I picked the former, so I’d be more or less healed by Christmas.
On operating day, a nurse got me all prepped and ready for the scalpel. They gave me a shot of something similar to Valium (the Propofol came later), and wheeled my bed down the hall. All I could see were ceiling lights going by, just like on “House.”
Then we entered the operating room. The middle of the operating room was empty, because my rolling bed was going to be parked there. But the walls were ringed with dozens of beeping and pinging electronic monitors. I’ve never seen so many electronic devices together in my life. I saw one Agilent monitor, and a bunch of others with names I couldn’t make out. It reminded me of the IT room in most companies. I guess they had to be set up to handle routine surgery like mine, and the not-so-routine operations as well.
To read this entire article, which appeared in the January issue of The PCB Design Magazine, click here.
Suggested Items
Aspocomp’s Q1 Net Sales and Operating Result Decreased YoY
04/18/2024 | AspocompInflation and interest rates, weak economic development, the uncertainties posed by Russia’s war of aggression and the situation in the Middle East, and global trade policy tensions will affect the operating environment of Aspocomp and its customers in the 2024 fiscal year.
IMI Core Business Sustains Path to Recovery with $13 Million of Net Income for the Year
04/05/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI) reports total group revenues of US$1.3 billion, 6% lower than the previous year, driven by factors attributable to its non-wholly owned subsidiary group including the shorter fiscal year of STI Enterprises Limited which was divested on October 31, 2023.
Intel Outlines Financial Framework for Foundry Business, Sets Path to Margin Expansion
04/03/2024 | BUSINESS WIREIntel Corporation outlined a new financial reporting structure that is aligned with the company’s previously announced foundry operating model for 2024 and beyond.
Jabil Posts Second Quarter Results
03/18/2024 | Jabil“Despite revenue headwinds this year, which are expected to be short-term, I’m pleased with the resiliency of our model and our team’s demonstrated ability to execute,” said CEO Kenny Wilson. “Even under these conditions, we expect to deliver strong core operating margins and free cash flow in FY24,” he added.
Aspocomp Posts Net Sales Down by 17% in 2023, Operating Profit Turned Negative
03/14/2024 | AspocompAspocomp estimates that its net sales for 2024 will increase from 2023 and its operating result will improve from 2023. In 2023, net sales amounted to EUR 32.3 million and the operating result was a loss of EUR 1.7 million.